Faculty of Science and Technology, Department of Engineering and Applied Sciences
Job title
Professor
Degree
博士(工学)(工学院大学)
Research funding number
80317510
J-Global ID
200901033684274272
Profile
1999- •Department of Engineering and Applied Science, Faculty of Science and Technology, Sophia Univers, Structional and functional biomaterials 1999- •Department of Engineering and Applied Science, Faculty of Science and Technology, Sophia Univers, Environmental strength and furacture strenngthIn late years aging in my country lets affection of motor function such as osteoporosis by alteration such as a bone or articular cartilage, osteoarthritis of spine, osteoarthritis increase. Therefore be aimed for improvement of rich quality of life in health, and the living habits that took in sports are spreading broadly. However, with increase and aging of the action population, locomotorium injury such as a fracture, ligamentous breakdown, a cartilage injury increases again, too. A treatment of such a locomotorium disorder is one of a future medical problem. It is important to return attribute of locomotorium, configuration, a physical characteristic to an as possible original physiological state. I study organism material replacing it in a bone, cartilage, band, arthrosis. Study in particular medicine and science and technology studies from a confluent point of view.(Subject of research) JSPS Research for the Future Program Fatigue characteristic evaluation of bio-titanium alloy Effects of Mechanical Stress on Corrosion Resistance of Metallic Biomaterials Evaluation of corrotion wear of Co-Cr alloy Fatigue characteristic evaluation of beta-bio-titanium alloy Influence of surface modification of bio metal material cause to organism Fracture characteristic of bio-apatite ceramics HAP Ceramics and HAP layer Formed on It's Surface in a Simulated Body Fluid Preparation and bio-function evaluation of organic - inorganic hybrid bio composites Construction of fatigue life improvement by surface treatment technology of titanium alloy for medical cares Fatigue characteristics evaluation of β type titanium alloy having a notch Fatigue characteristics evaluation of titanium alloy having a hole Fatigue characteristics evaluation of SUS316L steel having a hole Evaluation of Fatigue Characteristic of Ti-6Al-4V alloy shaped by Metal Powder Layered Method Evaluation of fatigue properties of electron beamed and laser peened Ti-6Al-4V ELI alloy Evaluation of 4-point Bending Fatigue Properties for Titanium Alloy Interlocking Nail Effect of notch factor on torsional fatigue property of pure titanium and stainless steel Evaluation of corrosion wear characteristics of biomedical Co-Cr alloy with a surface modification by ELID grinding Evaluation of corrosion fatigue properties of pre-strained SUS316 and SUS304 steel Effect of notches on fatigue properties of β titanium alloy Proposal of evaluation method of adhesion strength of apatite films deposited on titanium alloy Evaluation of fatigue characteristic of titanium alloy by shot-peening Evaluating of corrosion wear resistance of Co-Cr alloy with designed surface by scratch Investigation on Bad Fit of Locking Plate for Osteosynthesis Evaluation of shear adhesion strength of titanium alloy coated with apatite thin film Evaluation of bending fatigue properties of three-dimensional modeling titanium alloy subjected to surface modification process Fabrication of artificial bone by reef-building coral and its characteristics Evaluation of the torsional fatigue characteristics of the titanium alloy Evaluation of fretting fatigue properties of titanium alloy Evaluation of fatigue characteristic of Pure titanium alloy by shot-peening Influence of simulated body fluid on the interface strength test of apatite coating titanium Evaluation of the corrosion characteristics of the injection molding machine for SKD61 material Fatigue strength of pure titanium which has been subjected to shot peening and its mechanism Evaluation of load applied to the knee brace with a link mechanism Evaluation of corrosive wear characteristics of the titanium-based metal material that has been subjected to surface design Torsional fatigue characterization of surface-modified 3D modeling titanium alloy Evaluation of the fatigue characteristics of the 3D layered manufacturing cobalt chromium alloy Examination of the low profile of the spinal implant Influence of microstructure on the fatigue properties of pure titanium employing severe plastic deformation for grain refinement.( Evaluation of interfacial strength in thin-film coating material for medical use Evaluation of the distal fixing strength of the intramedullary nail implant Effect of strength due to laser marking to medical titanium material Development of lower limb muscle strength measurement equipment Evaluation of fretting fatigue characteristics of the different medical metal material Evaluation of torsional fatigue characteristics of the β titanium alloy(Proposed theme of joint or funded research) Mechanics characteristics evaluation of medical material
The Proceedings of Mechanical Engineering Congress, Japan 2019 J02329P 2019
Ti alloy and Co-Cr alloy are authorized as implant materials. These alloys are utilized by machining and heat treatment. The manufacturing process will generate residual stresses that influence in destruction and deformation of materials. X-Ray Di...
Metals have been used clinically as biomaterials, especially in the orthopaedic and dental fields. Metals used as implants wear at contact surfaces, producing metal particles and metal ions that may be harmful. Newly developed metal implants and m...
Barrel, nozzle and screw are plasticization parts of injection molding machines that works under high processing temperature. These parts are also exposed to corrosive gas and acid environment came from molten plastics. These combined factors caus...
Shot peening (SP) is one of the surface modification technologies to enhance fatigue strength. In this study, the mechanism of enhancement of bending fatigue property of shot peened pure titanium (JIS 2) was investigated. Surface roughness, vicker...
Torsion fatigue tests were conducted for circumferentially notched bars specimens of Ti-6Al-4V alloy to evaluate fatigue strength. The notch sensitivity was studied by using blunt (stress concentration factor Kt=2.0) and sharp (Kt=4.0) notched spe...
[Others] 2015年3月6日(金)にタワーホール船堀 産業振興センターで、コラボ産学官第12回研究成果発表会が開催されます。\n今回は、『3Dをつかったモノづくり』をテーマとして、新商品開発、プロダクトデザイン、3Dプリンタに関する研究成果が発表されます 6 Mar 2015 - 6 Mar 2015
[Others] 本教養講座は,丸亀市民への生涯学習として無料で開催されています.現代的な課題・活動に取り組んでいる行政や団体の方が講師となり,特に暮らしの中で役立つものを連載講座として実施しています.材料学会の講師派遣事業を通して行われました.材料に関連する様々な話題について小中高校生から社会人の皆さんまでを対象にした授業を提供しています.材料学会の本事業を丸亀市が活用し,今回の講座に至りました. 5 Jun 2014 - 5 Jun 2014