研究者業績
基本情報
- 所属
- 上智大学 理工学部機能創造理工学科 教授(兼任)理工学研究科委員長
- 学位
- 博士(工学)(早稲田大学)
- 連絡先
- takai-k
sophia.ac.jp - 研究者番号
- 50317509
- J-GLOBAL ID
- 200901007842400948
- researchmap会員ID
- 1000293758
【職歴】
・1990~1999:日本電信電話株式会社にて、通信用材料の研究に従事
(1)コンクリートポール用PC鋼材の遅れ破壊に関する研究、(2)通信アンテナ用超撥水・難着雪材料の開発、(3)光触媒材料の研究開発
・1999~:上智大学理工学部機械工学科(現在、機能創造理工学科)にて、機械・構造材料および機能性材料の研究開発に従事
(1)高強度鋼の水素による遅れ破壊に関する研究、(2)燃料電池システム用材料の水素環境脆化に関する研究、(3)各種金属材料中の水素の存在状態解析と水素の可視化技術の開発、(4)石英系光ファイバの環境脆化機構の解明、など
・2014~2017年:理工学部機能創造理工学科 学科長
・2018~2021年:理工学専攻機械工学領域 領域主任
・2022年~ :理工学研究科委員長
【教育歴】(主な担当講義):
マテリアルサイエンス、エネルギーと材料、材料工学特論、機能創造理工学実験演習2,
Energy & Material、機械工学輪講、理工学概説、持続可能な社会に向けたものづくり:自動車技術
【研究歴】
■主な研究テーマ
高強度鋼の遅れ破壊に関する研究
金属中の水素の存在状態に関する研究
燃料電池システム用高強度ステンレス鋼の水素存在状態と環境脆化
チタン・チタン合金中の水素存在状態解析
石英系光ファイバの環境脆化機構の解明
セラミックスの環境脆化機構解明
■主な学会活動
2005~2007年 日本鉄鋼協会「材料中の水素状態分析法標準化の基盤構築フォーラム」座長
2007~2009年 日本鉄鋼協会「水素脆化研究の基盤構築フォーラム」座長
2007~2012年 腐食防食協会「FIP試験分科会」主査
2009~2013年 日本鉄鋼協会「水素脆化研究の基盤構築研究会」主査
2015~2018年 日本鉄鋼協会「水素脆化の基本要因と特性評価研究会」主査
2019~2021年 日本鉄鋼協会 鉄鋼研究プロジェクト「高強度鋼の水素脆化における潜伏期から破壊までの機構解明」代表
2022年~ 日本鉄鋼協会 「水素脆化評価法に必須の要素技術の抽出」研究会Ⅱ 主査
経歴
3-
2023年4月 - 現在
-
2006年7月 - 2009年3月
-
1990年4月 - 1999年3月
委員歴
5-
2023年10月 - 現在
-
2005年9月 - 2006年3月
-
2001年4月 - 2003年3月
-
2001年1月 - 2001年3月
受賞
7-
2014年5月
-
2008年3月
論文
164-
Proceedings of the 5th International Conference on Metals & Hydrogen 46 2025年10月 査読有り責任著者
-
Proceedings of the 5th International Conference on Metals & Hydrogen 70 2025年9月 査読有り責任著者
-
Journal of Membrane Science 124401-124401 2025年7月 査読有り
-
Journal of Physics: Conference Series 3035(1) 012008-012008 2025年6月1日 査読有り最終著者Abstract The effect of hydrogen-enhanced strain-induced lattice defects formed during the incubation period on hydrogen embrittlement fracture of iron was clarified by quantitative evaluation using low-temperature thermal desorption spectroscopy (L-TDS) from −200 ºC. Tensile testing of iron specimens was conducted in solution with various concentrations of ammonium thiocyanate as a catalyst poison. Cathodic electrolysis was employed to establish conditions of low and high hydrogen content to examine the fracture characteristics of the iron specimens. The fracture elongation of the hydrogen-charged iron specimens was lower than that of the hydrogen-free specimens, although the elongation was the same regardless of the hydrogen content. In contrast, the flow stress during the deformation process increased with increasing hydrogen content. Specimens were prepared under the same hydrogen charging conditions and unloaded within a uniform elongation range. L-TDS was used to detect lattice defects with hydrogen re-charged as a probe under equilibrium conditions with dislocation cores and strain fields around the cores and vacancies in the specimens. The formation of vacancy-type defects was promoted in the presence of hydrogen during plastic deformation, and the extent of promotion was similar regardless of the hydrogen content. The concentration of hydrogen-enhanced strain-induced vacancies may thus affect the decrease in ductility due to the presence of hydrogen, and the hydrogen coordination number to its vacancies is responsible for the increase in flow stress.
-
Journal of Physics: Conference Series 3035(1) 012023-012023 2025年6月1日 査読有り最終著者Abstract The effects of aging treatments on the annihilation and accumulation behavior of hydrogen-enhanced strain-induced vacancies (HESIVs) formed in tempered martensitic steel were investigated. The vacancies were formed by applying plastic deformation in the presence of hydrogen. The tracer hydrogen content and peak temperature under various aging treatment conditions were measured using low-temperature thermal desorption spectroscopy (L-TDS). Aging treatments were performed in the absence and presence of hydrogen at 30 °C for 0, 2, 5, and 9 d. The spectra measured by L-TDS were divided into two peaks by using Gaussian curves: Peak 1H corresponding to hydrogen desorption from dislocations and Peak 2H corresponding to hydrogen desorption from vacancies. The amount of Peak 2H, i.e., the amount of vacancies decreased and the peak temperature of Peak 2H, i.e., clustered vacancy size increased with increasing aging time. The change in the amount and the peak temperature of Peak 2H was smaller than that in previous studies for pure iron. Furthermore, the change was greater for aging in the absence of hydrogen than for aging in the presence of hydrogen. Therefore, the impurities in the steel such as solid solute carbon and hydrogen probably stabilize vacancies, decrease the diffusion coefficient of vacancies, and then partially suppress the annihilation and accumulation of vacancies.
MISC
64-
Materials Science and Technology 36(10) 1003-1011 2020年7月1日 査読有り招待有り最終著者Exact simulations of engineering practice are often difficult to accomplish with test methods of materials performance against hydrogen embrittlement (HE). Instead, it is proposed that assessment of the intrinsic susceptibility to HE be adaptable to diverse usage environments and loading modes. This notion is based on recent findings concerning the predominant role of strain-induced vacancies and their involvement in characteristic features of HE such as microstructural effects and dependence on strain rates and temperatures. The function of hydrogen in enhancing the generation of strain-induced vacancies operates throughout the entire process of fracture, and the density of vacancies is detectable using hydrogen as a tracer. A method is proposed here for using as the parameter the difference in the amounts of tracer-hydrogen between specimens given cyclic stressing with and without hydrogen.
-
MATERIALS SCIENCE AND TECHNOLOGY 33(13) 1481-1496 2017年 査読有り
-
ふぇらむ = Bulletin of the Iron and Steel Institute of Japan : (一社)日本鉄鋼協会会報 18(3) 236-244 2013年
-
ISIJ INTERNATIONAL 52(2) 167-167 2012年
-
M&M材料力学カンファレンス 2011 "OS2206-1"-"OS2206-2" 2011年7月16日Hydrogen effects of pure titanium have been investigated in order to clarify a main factor causing the hydrogen embrittlement. Though a lot of studies reported that the main factor of hydrogen embrittlement of pure titanium was hydride, there is no study to evaluate using specimen including dissolved hydrogen content as much as the content of hydride. In the present study, hydrogen-charged titanium specimens including same hydrogen content as hydride or dissolved hydrogen are prepared by heat treatment. These specimens are tested under various hydrogen contents, strain rates and temperatures. As a result, not only hydride but also dissolved hydrogen affects mechanical properties such as tensile stremgth and fracture strain of pure titanium, that is, dissolved hydrogen also causes hydrogen embrittlement.
-
M&M材料力学カンファレンス 2011 "OS2202-1"-"OS2202-3" 2011年7月16日To improve the susceptibility of hydrogen embrittlement, it is important to identify hydrogen trapping site, binding energies, and occupation ratios at various lattice defects in metals. Thermal desorption spectrometer heated from lower temperature (L-TDS) which we have developed enables us to analyze them, In the present study, the influence of carbon and carbide on peak temperatures of hydrogen desorption, binding energies and occupation ratios in iron was examined. The specimens including 6ppm, 0.005%, 0.01% and 0.1% carbon in iron were prepared. For dislocation trapping, the peak at 283K desorbed from dislocation decreases with increasing carbon content. The binding energy between dislocation and hydrogen decreases with increasing carbon content from 24.9kJ/mol to 17.7kJ/mol. The hydrogen occupation ratio at dislocations also decreases with increasing carbon content. These finding indicate that carbon in iron causes significant influence on trapping behavior, since interstitial atoms such as carbon occupy lattice defects instead of hydrogen.
-
M&M材料力学カンファレンス 2011 "OS2205-1"-"OS2205-2" 2011年7月16日High strength steel with lower susceptibility of delayed fracture has been required to be developed, while, generally, steel above 1200 MPa of tensile strength increases the susceptibility. In the present study, the susceptibility of tempered martensitic steel with 1450 MPa is tried to reduce through higher-temperature tempering by adding Si and surface-softening , using induction heating. The strength of surface-softened steel is 1150 MPa at the surface, 1500 MPa at the center and 1450 MPa in the average. The susceptibility reduces by adding Si-content of 1.88 mass %. This is because the Si adding reduces carbide precipitations along prior γ grain boundaries, which is observed by TEM, and prevents intergranular fracture. In addition, the Si adding reduces stress relaxation, i.e. stabilizes dislocation structure. Furthermore, the surface-softening enables us to reduce the susceptibility, since the hydrogen concentration at the surface of crack initiation is lower than that at the center.
-
M&M材料力学カンファレンス 2011 "OS2203-1"-"OS2203-2" 2011年7月16日Although the interaction between dislocation and hydrogen in bcc metal such as pure iron plays the essential role in hydrogen embrittlement, little is known about the interaction in fcc metal such as stainless steel. Hydrogen spectra evolved from SUS 316L and 304 stainless steels during elasticity and plastic deformation were detected using a quadrupole mass spectrometer. Hydrogen desorption increased rapidly when plastic deformation began for SUS 316L, since dislocations drag hydrogen to the specimen surface. In contrast, hydrogen desorption increased with applying strain for SUS 304, because of phase transformation from austenite into martensite with larger hydrogen increased with decreasing strain rate. This result indicates that dislocation can drag and transport more amount of hydrogen when dislocation velocity approaches hydrogen diffusion rate. These lead conclusion that the interaction between dislocation and hydrogen occurs in not only bcc but also fcc metal. In the present study, relation between interaction between dislocation and hydrogen and hydrogen embrittlement is considered.
-
M&M材料力学カンファレンス 2011 "OS2204-1"-"OS2204-2" 2011年7月16日The lattice defect formation behavior associated with hydrogen under elastic tensile stress of tempered martensitic steel was examined from the viewpoint of dislocation and vacancy. In addition, the relationship between hydrogen embrittlement and lattice defects associated with hydrogen was investigated. In the early stage of applying elastic stress, the amount of lattice defects decreased, and then increased gradually with time of applied stress. The most probable reason for the decrease in the amount of lattice defects is due to dislocation annihilation and rearrangement of dislocation structure. In contrast, the increase in the amount of lattice defects can be assigned to the increase in the amount of vacancy clusters. The vacancy clusters enhanced by hydrogen and elastic stress cause ductility loss of the steel, even though hydrogen is not present in tensile test. Therefore, not only hydrogen but also the vacancy clusters are concluded to be important factor causing hydrogen embrittlement.
-
計算力学講演会講演論文集 2008(21) 37-38 2008年11月1日The factor that plays the essential role in hydrogen degradation has been examined for Inconel 625 and iron by means of tensile testing with interposed unloading and reloading with/without hydrogen charging. Aging at 30℃ or annealing at 200℃ was conducted at the unloaded stage in order to diffuse out hydrogen or to anneal out strain-induced defects. Hydrogen thermal desorption analysis was used to evaluate strain-induced defects that act as trapping sites of hydrogen. Fracture strain decreased in the initially hydrogen-charged specimens even though hydrogen was absent at the late stage of straining. Annealing at 200℃ at the unloaded stage almost completely recovered the decrease in fracture strain.
-
M&M材料力学カンファレンス 2007 655-656 2007年10月24日Hydrogen energy society has required for lower cost BCC metals with high-resistance to hydrogen environmental degradation instead of FCC metals with higher cost. However, BCC metals such as steels have higher degradation susceptibility than FCC metals, then the susceptibility must be improved. In the present study, the identification of lattice defect affecting the hydrogen environmental degradation has been investigated using pure iron emphasizing vacancy and dislocation, since the influence of other elements and inclusions is almost negligible.
-
M&M材料力学カンファレンス 2007 131-132 2007年10月24日Though various experiments of hydrogen in metal have been studied, there is very little understanding of hydrogen trapping states and degradation in aluminum. This is because the hydrogen dissolution enthalpy of aluminum is very high. In the present study, pure aluminum (99%) was charged with hydrogen by electrochemical method in various conditions. Large hydrogen concentrations were introduced in invariant condition. There were two peaks at 120℃ and 400℃ in hydrogen evolution profile. For the first peak (120℃), hydrogen is solute in lattice or trapped at vacancies or dislocations. For the second peak (400℃), hydrogen is precipitated as hydrogen molecule in blisters in aluminum. Hydrogen trapping states at first peak affects decrease in ductility. In contrast, the second peak does not affect the degradation. The failure strain of aluminum charged hydrogen decreases with strain rates.
-
M&M材料力学カンファレンス 2007 141-142 2007年10月24日High-strength steel has been required from the viewpoint of reduction in cost and environmental deterioration in recent years. However the probability of delayed fracture caused by hydrogen increases with steel strength. As universal mechanism of hydrogen embrittlement, hydrogen enhances the dislocation mobility and local plasticity and so stabilizes and increases vacancies. From these behaviors of hydrogen, high-strength steel with high resistance to delayed fracture was developed to suppression dislocation mobility and vacancy formation. Pre-strain and ageing method enable to improve the delayed fracture property of high-strength steel. The property of the delayed fracture was evaluated and the mechanism was examined.
-
M&M材料力学カンファレンス 2007 125-126 2007年10月24日The main role of hydrogen in hydrogen embrittlement has been investigated for fcc and bcc metals. Both fcc and bcc metals show that hydrogen contents of the strained metals with hydrogen are more than those of strained metals without hydrogen. It suggested when including hydrogen promote the formation of the trapping site. In SSRT test, when stress was relieved before the fracture strain, held at 30℃ and reloaded. In this case, fracture strain was not recovered. While held at 200℃, fracture strain was completely recovered. These showed that the vacancy cluster contributed to the ductility reduction.
-
M&M材料力学カンファレンス 2007 123-124 2007年10月24日Hydrogen embrittlement has been analyzed by using thermal desorption spectrometry (TDS). However, it is difficult to separate the states of trapped hydrogen at various lattice defects such as dislocation and vacancy. It is reported that peaks of hydrogen desorption are dependence on thickness of specimen, heating rate, binding energy and defect density. Thus, the objective of the present study is the separation of the hydrogen states in pure iron emphasized dislocation and vacancy using controlling thickness of specimen and heating rate.
-
M&M材料力学カンファレンス 2007 129-130 2007年10月24日Stainless steel has been expected for infrastructural materials for hydrogen energy society. However, metastable austenitic stainless steel is reported to deteriorate in high-pressure hydrogen. In the present study, to determine the cathodic charging condition of SUS 304, hydrogen absorption properties charged by high-pressure hydrogen and cathodic charging have been investigated. In addition, to clarify the mechanism for hydrogen degradation of SUS 304, the main factor affecting hydrogen degradation and recovery have been identified from the standpoint of hydrogen, vacancy, dislocation, and stress induced martensite.
-
ふぇらむ : 日本鉄鋼協会会報 = Bulletin of the Iron and Steel Institute of Japan 11(7) 468-468 2006年7月1日
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 18(3) 560-560 2005年3月1日 査読有り責任著者
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 18(3) 561-561 2005年3月1日 査読有り責任著者
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 17(6) 1353-1353 2004年9月1日
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 17(6) 1352-1352 2004年9月1日
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 17(6) 1355-1355 2004年9月1日 責任著者
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 17(3) 458-458 2004年3月1日
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 17(3) 457-457 2004年3月1日
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 17(3) 454-454 2004年3月1日
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 16(6) 1544-1544 2003年9月1日
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 16(6) P22 2003年9月1日
-
Materials Science and Engineering: A 344(1-2) 86-91 2003年3月 査読有り
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 16(3) 567-567 2003年3月1日
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 16(3) P34 2003年3月1日 責任著者
-
材料とプロセス : 日本鉄鋼協会講演論文集 = Current advances in materials and processes : report of the ISIJ meeting 15(6) 1020-1023 2002年9月1日
書籍等出版物
10講演・口頭発表等
135共同研究・競争的資金等の研究課題
18-
日本学術振興会 科学研究費助成事業 2025年4月 - 2029年3月
-
日本学術振興会 科学研究費助成事業 2024年6月 - 2027年3月
-
(一社)日本鉄鋼協会 研究会Ⅱ 2022年4月 - 2025年3月
-
(一社)日本鉄鋼協会 鉄鋼協会研究プロジェクト 2019年4月 - 2022年3月
-
NEDO(委託先:新構造材料技術研究組合) 超高強度薄鋼板の水素脆化挙動評価技術の開発 2018年4月 - 2021年3月
その他
5-
2003年4月卒研生および院生に研究成果を日本鉄鋼協会、日本金属学会、日本機械学会などの講演大会で積極的に発表させ、他大学や企業の研究者と議論を交わすことで、知的向上、プレゼン能力向上を促進している。修士課程修了までに2~3回の外部発表を行っている。
-
2003年4月毎回の授業終了後にホームページへ英語で記述した演習問題を掲載し、次回授業までに提出させる。これを半年間繰り返すことにより、科学技術英語および専門用語に慣れ、また、学生の理解度もアップし、さらに、学生の理解しがたい点を次の授業で解説することで、大幅に理解度がアップする。
-
2003年4月各授業で使用する図面をインターネットからダウンロードできるようにし、予習および授業中の理解度促進を図っている。また、講義はすべて電子ファイル(主に、ppt)で作成し、最先端の材料技術の応用例などを写真、動画でタイムリーに紹介することで、学生たちに身近に感じてもらいモチベーションのアップを図っている。
-
2003年4月学会発表の概要、投稿論文、国際会議のプロシーディングスなど研究成果を発表する際、日本語および英語ともに添削し、学生へ返却し、これを繰り返すことで科学技術論文の書き方を習得させている。
-
2003年4月理工学部で授業アンケートをはじめる前から独自に授業評価を行い、授業改善に努めてきた。その結果、例えば「授業が理解しやすかったか:4.6点/5点」、「スライドなどはわかりやすかったか:4.7点/5点」など、学生からある程度高い満足度を得られた。