理工学部
  1. Researcher List
  2. Hisamori Noriyuki

Hisamori Noriyuki

  (久森 紀之)

Profile Information

Affiliation
Professor, Faculty of Science and Technology, Department of Engineering and Applied Sciences, Sophia University
Degree
博士（工学）(工学院大学)
Contact information
hisamorisophia.ac.jp
Researcher number
80317510
J-GLOBAL ID
200901033684274272
researchmap Member ID
1000293757

1999－　•Department of Engineering and Applied Science, Faculty of Science and Technology, Sophia Univers, Structional and functional biomaterials
1999－　•Department of Engineering and Applied Science, Faculty of Science and Technology, Sophia Univers, Environmental strength and furacture strenngth

In late years aging in my country lets affection of motor function such as osteoporosis by alteration such as a bone or articular cartilage, osteoarthritis of spine, osteoarthritis increase. Therefore be aimed for improvement of rich quality of life in health, and the living habits that took in sports are spreading broadly. However, with increase and aging of the action population, locomotorium injury such as a fracture, ligamentous breakdown, a cartilage injury increases again, too. A treatment of such a locomotorium disorder is one of a future medical problem. It is important to return attribute of locomotorium, configuration, a physical characteristic to an as possible original physiological state.
I study organism material replacing it in a bone, cartilage, band, arthrosis.
Study in particular medicine and science and technology studies from a confluent point of view.

(Subject of research)
JSPS Research for the Future Program
Fatigue characteristic evaluation of bio-titanium alloy
Effects of Mechanical Stress on Corrosion Resistance of Metallic Biomaterials
Evaluation of corrotion wear of Co-Cr alloy
Fatigue characteristic evaluation of beta-bio-titanium alloy
Influence of surface modification of bio metal material cause to organism
Fracture characteristic of bio-apatite ceramics
HAP Ceramics and HAP layer Formed on It's Surface in a Simulated Body Fluid
Preparation and bio-function evaluation of organic - inorganic hybrid bio composites
Construction of fatigue life improvement by surface treatment technology of titanium alloy for medical cares
Fatigue characteristics evaluation of β type titanium alloy having a notch
Fatigue characteristics evaluation of titanium alloy having a hole
Fatigue characteristics evaluation of SUS316L steel having a hole
Evaluation of Fatigue Characteristic of Ti-6Al-4V alloy shaped by Metal Powder Layered Method
Evaluation of fatigue properties of electron beamed and laser peened Ti-6Al-4V ELI alloy
Evaluation of 4-point Bending Fatigue Properties for Titanium Alloy Interlocking Nail
Effect of notch factor on torsional fatigue property of pure titanium and stainless steel
Evaluation of corrosion wear characteristics of biomedical Co-Cr alloy with a surface modification by ELID grinding
Evaluation of corrosion fatigue properties of pre-strained SUS316 and SUS304 steel
Effect of notches on fatigue properties of β titanium alloy
Proposal of evaluation method of adhesion strength of apatite films deposited on titanium alloy
Evaluation of fatigue characteristic of titanium alloy by shot-peening
Evaluating of corrosion wear　resistance of Co-Cr alloy with designed surface by scratch
Investigation on Bad Fit of Locking Plate for Osteosynthesis
Evaluation of shear adhesion strength of titanium alloy coated with apatite thin film
Evaluation of bending fatigue properties of three-dimensional modeling titanium alloy subjected to surface modification process
Fabrication of artificial bone by reef-building coral and its characteristics
Evaluation of the torsional fatigue characteristics of the titanium alloy
Evaluation of fretting fatigue properties of titanium alloy
Evaluation of fatigue characteristic of Pure titanium alloy by shot-peening
Influence of simulated body fluid on the interface strength test of apatite coating titanium
Evaluation of the corrosion characteristics of the injection molding machine for SKD61 material
Fatigue strength of pure titanium which has been subjected to shot peening and its mechanism
Evaluation of load applied to the knee brace with a link mechanism
Evaluation of corrosive wear characteristics of the titanium-based metal material that has been subjected to surface design
Torsional fatigue characterization of surface-modified 3D modeling titanium alloy
Evaluation of the fatigue characteristics of the 3D layered manufacturing cobalt chromium alloy
Examination of the low profile of the spinal implant
Influence of microstructure on the fatigue properties of pure titanium employing severe plastic deformation for grain refinement.（
Evaluation of interfacial strength in thin-film coating material for medical use
Evaluation of the distal fixing strength of the intramedullary nail implant
Effect of strength due to laser marking to medical titanium material
Development of lower limb muscle strength measurement equipment
Evaluation of fretting fatigue characteristics of the different medical metal material
Evaluation of torsional fatigue characteristics of the β titanium alloy

(Proposed theme of joint or funded research)
Mechanics characteristics evaluation of medical material

Research Interests

 29

Research Areas

 5

Research History

 4

Committee Memberships

 16
More

Awards

 24
More

Papers

 112
More

Misc.

 57
  • 久森紀之
    レーザ協会誌, 41(2) 20-27, Feb, 2017  Peer-reviewedInvited
  • MASAKI Kiyotaka, ISOMURA Naoko, YAMAMOTO Hiromi, HISAMORI Noriyuki
    2016(69) 115-116, Mar 15, 2016  
  • BANG Jaehui, HISAMORI Noriyuki, HONMA Shuhei, WADA Kazuki, FUKASE Yasushi
    2015 "GS0607-427-1"-"GS0607-427-3", Nov 21, 2015  
    Barrel, nozzle and screw are plasticization parts of injection molding machines that works under high processing temperature. These parts are also exposed to corrosive gas and acid environment came from molten plastics. These combined factors cause considerable corrosion damage on plasticization parts. Furthermore, frictions with glass-filled polymers in molten plastic give rise to wear damages simultaneously on plasticization parts. In this study, the electrochemical test has been conducted on SKD61 specimens in the solute H_2SO_4 dissolving nylon66-25wt.% fiberglass. It was found that oxide film formation was promoted due to the oxidation reaction between SKD61 surface and the solution while the regenerative ability of the oxide film of SKD61 was deteriorated. The corrosion wear test was also conducted by using Alumina ceramics ball on SKD61 disk specimens. Destruction of the oxide film of SKD61 due to friction was confirmed. The regenerative ability of oxide film was also verified in the test.
  • MOCHIZUKI Ryota, HISAMORI Noriyuki, GOWA Daisuke, KOBAYASI Yuji
    2015 "OS1313-426-1"-"OS1313-426-3", Nov 21, 2015  
    Shot peening (SP) is one of the surface modification technologies to enhance fatigue strength. In this study, the mechanism of enhancement of bending fatigue property of shot peened pure titanium (JIS 2) was investigated. Surface roughness, vickers hardness of surface and subsurface, and bending fatigue strength was measured. Surface roughness and hardness of surface and subsurface were increased by SP. The bending fatigue strength was increased highly by SP because increasing of hardness effected more greatly than increasing of surface roughness. The maximum of amount of increase 2.7 times in 10^7 cycles. It was found that the bending fatigue strength was increased by increasing of hardness of surface and subsurface by SP. Therefore, it is obvious that fatigue strength of pure titanium is increased highly by SP.
  • WATANABE Satoshi, HISAMORI Noriyuki
    2015 "OS1314-447-1"-"OS1314-447-3", Nov 21, 2015  
    Torsion fatigue tests were conducted for circumferentially notched bars specimens of Ti-6Al-4V alloy to evaluate fatigue strength. The notch sensitivity was studied by using blunt (stress concentration factor Kt=2.0) and sharp (Kt=4.0) notched specimens. The number of cycles to failure was obtained and the crack initiation life was estimated from the applied torque to the specimens. The number of cycles to failure and fatigue strength decreased with increasing the value of stress concentration factor. When compared at the same fatigue life, the crack initiation life of Kt=4.0 specimen was much shorter than that of Kt=2.0. The crack propagation behaviors were analyzed by observing fractured surface. When stress amplitude is low, the tensile crack propagated toward a 45° direction of the longitudinal axis of the specimen, while under high stress amplitude, the shear crack propagated in the circumferential direction both in blunt and sharp notched specimens forming flat fracture surface. The fracture surface showed factory-roof pattern under middle stress amplitude. The angle of a fracture plane of the blunt notch under low stress amplitude was 45° to the axial direction. The formation of factory-roof may increase contact areas in the fractured surface, thus increase crack propagation life.
More

Books and Other Publications

 6
More

Presentations

 33
More

Professional Memberships

 16
More

Research Projects

 22
More

Industrial Property Rights

 7
More

Social Activities

 5

Other

 22
  • Sep, 2018 - Sep, 2018
    これから疲労設計に携わろうとする若手技術者，新たに耐疲労設計を必要とする技術者や疲労研究を従事する大学院生など，いわゆる疲労に関する初心者を対象に，疲労の基礎的知識から具体的な設計の初歩を講述する講習会
  • Aug, 2017 - Aug, 2017
    これから疲労設計に携わろうとする若手技術者，新たに耐疲労設計を必要とする技術者や疲労研究を従事する大学院生など，いわゆる疲労に関する初心者を対象に，疲労の基礎的知識から具体的な設計の初歩を講述する講習会
  • Sep, 2016 - Sep, 2016
    これから疲労設計に携わろうとする若手技術者，新たに耐疲労設計を必要とする技術者や疲労研究を従事する大学院生など，いわゆる疲労に関する初心者を対象に，疲労の基礎的知識から具体的な設計の初歩を講述する講習会
  • Apr, 2015 - Mar, 2016
  • Aug, 2015 - Sep, 2015
    これから疲労設計に携わろうとする若手技術者，新たに耐疲労設計を必要とする技術者や疲労研究を従事する大学院生など，いわゆる疲労に関する初心者を対象に，疲労の基礎的知識から具体的な設計の初歩を講述する講習会
More
To the list screen